CUCKOO
User Manual
CK-G170BS
CK-G170BS User Manual
Part Names and Accessories
Main Body
- 1Water Outlet
- 2Tea Basket Handle
- 3Lid (Tea Basket)
- 4Control Panel
- 5Handle
- 6Tea Basket
- 7BODY
Control Panel
- 1Temperature Display
- 2Temperature Adjustment Button (+ / −)
- 3Celsius /Fahrenheit Button
- 4Power button
Accessories
※ The product illustrated in this manual may vary from the actual product.
Important Safeguards
- Read and follow all safety instructions provided in this manual to ensure safety and to protect the user and other individuals from physical harm and household damage.
- Safety instructions are classified and described according to the level of harm and damage caused by improper use, as shown below.
| Symbol Type | Description |
|---|---|
| Warning | Potentially dangerous situation that can cause serious injuries or death if not avoided. |
| Caution | Potentially dangerous situation that can cause minor injuries if not avoided. |
| Triangle Alert Icon | This symbol is to remind you to be cautious about a potentially dangerous situation under special circumstances. Please read the details carefully and follow the instructions to avoid dangerous situations. |
| Do not | This symbol is used to indicate actions that are prohibited. |
| Instruction | This symbol is used to indicate 'instruction' actions. |
Warning — Do not
WarningDo not
When putting in or pulling out the power plug, remove moisture first from your hands and put in or pull out the power plug by holding the power plug.
- Pulling out the power plug with wet hands can cause electric shock.
- Pulling the power cord by force can damage the cord and may cause a short circuit or electric shock. Please check the state of the power cord and plug frequently.
WarningDo not
Plug the power plug into a 120V outlet with power surge protection. Do not plug in multiple devices into the same power outlet or extension cord simultaneously.
- When multiple devices are plugged into the same power outlet or if the device is plugged into an inappropriate power input, it may cause heating, fire and electric shock.
- If there is a foreign substance or water on the power plug, please wipe it clean before plugging into the socket.
- Use an extension cord of 10A or higher.
WarningDo not
Do not put in and pull out the power plug continuously.
- This may cause electric shock or fire.
WarningDo not
Do not bend, tie or pull the power cord by force.
- This may cause electric shock or fire due to a short circuit. Please check the state of the power cord frequently.
WarningDo not
Wipe off any foreign substance from the power plug with a dry cloth.
- This may cause electric shock or fire. Please check the state of the power plug frequently.
WarningDo not
This product should not be used by people including children who lack physical or mental abilities, experience and knowledge to use the product properly without instruction.
- Do not let children play with the product.
- It may cause electric shock or injury.
WarningDo not
Do not press the unlock button while the product is in the heating mode and do not open the lid.
- It may cause fire or safety incidents.
WarningDo not
Do not disassemble, repair or modify the product.
Be sure to contact the customer service center for product repair.
WarningDo not
The product must not be used near direct sunlight, gas burners, lighters or heating devices.
- This can cause short circuit, electric shock, deformation, discoloration and fire.
- Do not place the power cord near heating devices. The cord cover may melt, causing fire or electric shock.
WarningDo not
Do not touch the steam vent and water supply vent.
- You may get burned from steam.
- Do not let children handle this product. The steam vent discharges hot steam; therefore, do not come in contact with the product with your face or hands.
WarningDo not
Do not spray insecticide or chemical substances inside the product.
- It may cause fire.
WarningDo not
Do not insert any metal bars or other foreign matter in the steam vent or inside the product.
- It may deteriorate water, cause fire, or damage the inner pot coating.
WarningDo not
Do not place it in a bumpy or slanted area. Do not place it on a rug, cushion or laminated floor.
- It may cause electric shock or injury.
- It may cause a deformation or malfunction of the product.
WarningDo not
Please make sure to use a special base for the product. If you use a base from another product, it may cause a product malfunction.
WarningDo not
Do not keep nor use insecticides, combustible gas, inflammable or toxic substances near the product.
- This may cause fire or a deformation or malfunction of the product.
Warning — Instruction
WarningInstruction
If the power cord or plug is broken or shaken, please stop using it and contact the customer service center.
WarningInstruction
Please hold the handle of the product while using it.
WarningInstruction
Do not clean/wash the product inside the sink. Ensure that water does not enter the product except the inner pot.
- It may cause short circuit, electric shock, or fire. If water has entered the product, do not use the product, pull out the power plug and call our customer service.
WarningInstruction
Please unplug the plug when you are not using the product.
Caution — Do not
CautionDo not
Do not add water in excess of the maximum capacity of the container.
- If you add water in excess of the maximum capacity of the container, hot water may overflow.
CautionDo not
Do not apply impact on the product or drop the product.
- This may cause product defect or other safety issues.
- Do not apply excessive impact on the product or drop the product.
CautionDo not
Do not stand on top of the product or put anything heavy.
- It may cause a malfunction of the product or injury due to fall or damages.
CautionDo not
Do not touch the body of the kettle when boiling water.
- It may cause fire or safety incidents.
Caution — Instruction
CautionInstruction
When moving the product, please check the power is turned off.
- This may cause product defect or other safety issues.
CautionInstruction
If there is abnormal noise, smoke, or smell is emitted from the product, first pull out the power plug, and then contact our customer service center.
- This may cause fire, burns or injury.
CautionInstruction
Do not put the product or anything heavy on the power cord.
- This may cause damage to the power cord that could lead to fire, electric shock.
CautionInstruction
When pouring water, do not tilt the product too fast.
- It may cause safety incidents.
CautionInstruction
Do not put milk, coffee, ramen, ice.
Do not use the product for anything other than boiling water.
- This may cause odor or defect.
CautionInstruction
Please avoid using the product near a heating device.
- It may cause fire or electric shock.
CautionInstruction
When opening the lid of the product, be careful not to bump the tea basket into the glass.
- It may cause product defect or other safety issues.
Method of cleaning abrasive before using the product
This product's ultrasonic cleaning process removes residual impurities and abrasives, but may produce a small amount of abrasives. Before using it, make sure to clean the product following the steps below.
-
STEP 1 : Wipe a paper towel with a small amount of cooking oil.
-
STEP 2 : Wipe moist sponge with baking soda.
-
STEP 3 : Finish cleaning container of product with kitchen detergent.
-
STEP 4 : Please wipe it with a paper towel again to check the condition of the container.
Check before using the product
-
Please open the lid of the product
-
Please fill it with water
-
Caution
- Do not fill with water while the product is on the base.
- Do not add water in excess of the maximum capacity of the container.
-
-
Please close the lid.
- If you do not close the lid, it may result in burns caused by steam or boiling water.
-
Please place the product in the groove on the base power connector.
-
Caution
- Wipe the remaining water off the base.
- Problems caused by the use of bases not included in the product are not guaranteed.
-
-
Plug in the power plug.
Standby Mode
-
When the product is placed on the base with electricity flowing, the unit will then beep and enter standby mode after one second, and the current water temperature is displayed at all times
| Mode | Description |
|---|---|
| Standby Mode | • After the power cord is plugged in and before setting up the product’s features • After water has been boiled |
Adjusting the Temperature
-
Press “-” once to lower the temperature by 18 °F (10 °C)
-
Press “+” once to raise the temperature by 18 °F (10 °C)
-
Range of temperature adjustment
- Heating mode : 104~212 °F (40~100 °C)
- Warming mode : 104~203 °F (40 ~ 95 °C)
LED color
The LED color changes depending on the operation temperature of the electric kettle.
| Color | temperature |
|---|---|
| Green | 32~140 °F (0 ~ 60 °C) |
| Skyblue | 141~158 °F (61~70 °C) |
| Blue | 159~176 °F (71~80 °C) |
| Purple | 177~194 °F (81~90 °C) |
| Red | 195~212 °F (91~100 °C) |
Operation – Heating Mode
CAUTION
- The set temperature depends on the water capacity and thus may not be consistent with actual temperature.
Heat to 104~212 °F (100 °C)
When the Power button is pressed in Standby mode, the unit is heated to 104~212 °F (100 °C) with a beep sound. Once complete, the unit will make 3 beep sounds and then enter Standby mode.
Tip
The initial temperature of Heating mode is always 212 °F (100 °C).
Touch the Power button once to heat water to 212 °F (100 °C), regardless of the current water temperature.
Heat to a Temperature Other than 212 °F (100 °C)
-
Select your desired temperature with the “-/+” button in Standby mode, the number on the temperature display window will blink 3 times and the water will start to boil.
-
When the set temperature is reached, you’ll hear beep sounds, and unit will enter Standby mode.
Heating Mode Completed
-
When heating is completed, the unit will automatically enter Standby mode.
Operation – Warming Mode
CAUTION
- The set temperature depends on the water capacity and thus may not be consistent with actual temperature.
- With the heat still on, fill the unit with the required amount of water. The water level must reach at least the minimum mark (0.4 L). Boiling water dry or switching on the unit without any water in it may cause product failure.
Warming to 104 °F (40 °C)
Hold the POWER button for 3 seconds in Standby mode without setting the temperature. You’ll hear a beep sound, and water will start heating to 104 °F (40 °C), regardless of the current water temperature.
※ The water will be kept warm for up to 2 hours after reaching the set temperature.
※ If the product is removed and then placed on the base again within 3 minutes, the product remembers the last setting
Warming to Temperatures Other than 104 °F (40 °C)
Hold the power button for 3 seconds and then select your desired temperature with the “-/+” button.
The number on the temperature display window will blink 3 times and the water will start to warm.
During the warming operation
During the warming operation, the temperature indication (°C / °F) on the temperature display window blinks.
Cleaning and Maintenance
CAUTION
- Do not remove the water scale deposits using any method other than those recommended in the instruction manual.
- Remove the water scale deposits at least once every month. The warranty does not cover any product issues caused by failure to remove the water scale deposits on a regular basis.
- Wipe the outer surface of the base and product with a soft cloth and cleaning solution, avoiding contact with water as much as possible.
Using Vinegar to Remove the Water Scale Deposits
-
Fill the kettle with water to the 1.7L mark and heat.
-
When heating is completed, add at least 10cc of vinegar to the filled water.
-
Leave it overnight.
-
The next day, empty the kettle and thoroughly wash the inside.
-
Fill the kettle with clean water, and heat it.
-
Empty the kettle and wash the inside with clean water.
※ Repeat the above process for any remaining scale deposits or residue.
Using citric acid to remove water scale deposits
-
Fill the kettle with water to the 1.7L mark.
-
Add 30-40g of citric acid to the kettle that’s filled with water.
-
Close the lid and heat the water with citric acid added.
-
After the water has been heated once, open the lid and cool the water inside the kettle.
-
CAUTION
- When cooling the water, pull out the power plug from the outlet.
-
-
After cooling, close the lid and heat again.
-
Repeat steps 4 and 5 two to three times. Then, empty the kettle, boil it again with clean water, and rinse.
Troubleshooting
▼ The unit may not work properly if you do not follow the user manual. Please read and check the following. If you cannot remedy problems by using the troubleshooting chart below, contact Cuckoo customer service.
| Problems | Cause | Solutions |
|---|---|---|
| Water inside the product is lukewarm or not being heated | • Has the power cord been damaged? • Is the power plug connected? • Is the proper voltage being used? |
• Check for power outages, and use the product again when power is being supplied. If the power cord is damaged, contact the customer service center. • Check for power outages and then firmly connect the power plug. • Make sure you use 120V only. |
| Water is flowing out of the outlet during heating. | • Did you put in water above the maximum water level mark? • Did you put a damp towel or other items around the outlet? • Is the outlet being blocked by foreign substances? |
• Take out water so that the level is below the maximum water level mark. • Remove the items before using the product. • Remove the foreign substances before use. |
| The water smells. | • Does your tap water smell? • Is this your first time using the product? • Have you used it with liquids other than water? |
• Check if your tap water smells. • The water may smell during the first use of the product. Boil water a couple of times and discard it before use. • Do not use the unit with liquids other than water. |
| The water doesn’t heat up to the temperature I want. | • Is the current temperature of the filled water high? | • Check if the temperature of the water in the kettle is higher than the selected temperature. If the water temperature is higher than the selected temperature, add cold water. |
| The kettle turns off even when I try to turn it on. | • Is the kettle filled with water? | • Fill the kettle with water above the minimum water level mark. |
Product Specifications
| Category | Electric Kettle |
| Model | CK-G170BS |
| Rated Voltage | 120V/60Hz |
| Rated Power Consumption | 1500W |
| Temperature Control Range | 104 °F ~ 212 °F (40 °C ~ 100 °C) |
| Warm Temperature | 104 °F ~ 203 °F (40 °C ~ 95 °C) |
| Capacity | Max : 1.7L / Min : 0.4L |
| Weight | 1.36kg |
| Size | 240mm x 155mm x 263mm |
※ For household use only.
※ The information (design and specifications) provided in this user manual is subject to change without prior notice.
CUCKOO
CUCKOO ELECTRONICS AMERICA, INC.
For service inquiries, contact us at support@cuckooamerica.com
www.cuckooamerica.com